Automatic material handling.
Automatic loading, with servo-driven feeding and cutting motion using ball screws.
General-purpose Series
G-100
A closer look at the cut.
An automatic circular saw for general-purpose applications. Explore the configuration and watch a real stainless-steel cutting demonstration.
15–100 mmSpecified cutting diameter
330 mmSaw blade diameter
11 kWMain motor
Standard configuration
Inside the process.
From loading and clamping to cutting and chip handling.
Hydraulic workholding.
Horizontal and inclined hydraulic clamping, supported by a cast machine bed.
PLC & touchscreen control.
Control and set up the cutting process through the machine’s PLC and touchscreen.
Lubrication & chip handling.
Automatic lubrication with an alarm and a chip conveyor support the cutting cycle. Confirm the cooling and lubrication options for your configuration.
G-100 / Specifications
The key details.
G-100 standard configuration. Confirm suitability for your material and application before ordering.
Specified material conditions:
Hardness ≤ HRC 30
Strength ≤ 800 N/mm²
Stock straightness ≤ 3 mm/m
| Specified cutting diameter | 15–100 mm |
|---|---|
| Saw blade diameter | 330 mm |
| Main motor | 11 kW |
| Blade speed | 50–140 rpm, variable |
| Single feed length | 10–700 mm |
| Feed speed | 5–20 m/min |
| Stock length | 4,000–7,000 mm |
| Supply voltage | 380 V · 3-phase · 50 Hz |
Real machine · Supplied demonstration
G-100.
Cutting stainless steel.
Watch the general-purpose G-100 cutting stainless steel. Play it at your own pace.
Material grade, hardness, dimensions and cutting settings are not specified for this demonstration. It is not an S Series performance test.
Your material. Your next machine.
Let’s talk about
your next cut.
Tell us what you cut. Start with your material, dimensions and production requirements.